How to Select a Hockey Skate Blade and Holder
Finding the correct hockey skate blade or skate holder size is a simple process and only requires a detailed look at your current hockey skates runner and holder. Both share the same sizing information and are constructed anywhere from 211mm - 322mm sizes or in some cases Jr 1 - Sr 12. It is important to note that every holder utilizes a specific runner-locking design, therefore it is imperative to know what specific holder model you have along with its size.
Step 1: Confirm Your Holder or Runner Size
Look at the heel portion of the holder and search for a three-digit number, usually located by the rear rivets. This three-digit number is the size of your holder and also the runner. Most blades also have this three-digit number stamped onto it too, so you can remove your current runner and confirm the three-digit number matches the holder. On the holder, you may see an "L" or an "R" beside this number, which simply indicates if it is the "Left" or "Right" holder.
In the case below, the player would identify their skates as having a 304mm holder and runner set up. Along with the size, it is vital to have the specific skate holder model which we will find in Step 2.
Step 2: Confirm Your Skate Holder's Model
It is now time to identify your skate's holder in order to purchase the correct skate blade. Located on the holder is the name of its make and model, found on both the front and rear post. For example, if you have a CCM JetSpeed FT4 Pro Skate, the holder is the CCM SpeedBlade XS Holder. "SpeedBlade" is located on the front post and "XS" is labeled on the back post, alongside CCM's XS runner quick-release dial.
With this information, the player would then begin shopping for compatible SpeedBlade XS runners or holders in size 304mm. If you are still unsure which model of holder you have, please use the graphics below for more guidance.
If the three-digit number on both your holder and runner are ineligible, no need to worry! Simply find your hockey skate's brand, model, and year using the provided information below and correspond with which holder they are listed under. Click the black button and use the sizing chart on the runner or holder's product page to identify your runner or holder's length by finding your skate size and width.
Ice Hockey Skate Runner and Holder Compatibility Charts
Bauer Skate Runner and Holder Compatibility
Bauer Tuuk Lightspeed Edge Runner and Holder
Details: "LightSpeed Edge" on the front post, "Tuuk" and quick-release trigger on the rear post
2022 Supreme Mach, M5 Pro, M4, M3,
2021 Vapor HyperLite, 3X Pro, 3X, X3.7
2020 Supreme Ultrasonic, 3S Pro, 3S, S37
2019 Vapor 2X Pro, 2X, X2.9, X2.7
2018 Supreme 2S Pro, 2S, S29, S27
2018 Nexus 2N, N2900, N2700
2017 Vapor 1X, X900, X800, X700, X600, X500
2016 Nexus 1N, N9000, N8000, N7000
2016 Supreme 1S, S190, S180, S170, S160
2015 Vapor 1X, X900, X800, X700, X600, X500
2014 Nexus 8000, 7000, 6000, 5000
2014 Supreme MX3, 190, 180, 170, 160
2013 Vapor APX2, X100, X90, X80, X70, X60
Lightspeed Edge Runners Lightspeed Edge Holder
Bauer Tuuk Lightspeed 2 Runner and Holder
Details: "LightSpeed 2" on the front post, "Tuuk" on the rear post
2013 Nexus 1000, 800, 600, 400
2012 Supreme NXG, One.9, One.8, One.7, One.6
2012 Vapor APX, X7.0, X6.0, X5.0, X4.0
LS Non-Edge Runners LS Non-Edge Holder
Bauer Vertexx Edge Holder and Runner (Goalie)
Details: "Vertexx Edge" on the rear post with quick-release trigger
2021 Pro, Elite, GSX
2020 Ultrasonic, 3S Pro, 3S
2019 Vapor 2X Pro, X2.9, X2.7
2018 Supreme 2S Pro, S29, S27
2017 Vapor 1X, X900, X700
2016 Supreme 1S, S190, S170
Vertexx Edge Runners Vertexx Edge Holder
CCM Skate Holder and Runner Compatibility
CCM SpeedBlade XS Holder and Runner
Details: "SpeedBlade" on the front post, "XS" and quick-release dial on the rear post
2023 JetSpeed FT6 Pro, FT6, FT680, FT670
2022 Tacks AS-V Pro, AS-V, AS-590, AS-580, AS-570
2021 JetSpeed FT4 Pro, FT4, FT485, FT475
2021 RibCor 100K Pro, 90K, 88K, 86K
2020 Super Tacks AS3 Pro, AS3, 9380, 9370
2019 JetSpeed FT2, FT490, FT480, FT470, FT460
2019 RibCor 80K, 78K, 76K
SpeedBlade XS Runners
CCM SpeedBlade 4.0 Holder and Runner
Details: "4.0" on the front post, "SB" on the rear post
2018 Super Tacks AS1, 9090, 9080, 9070, 9060
2017 JetSpeed FT1, FT390, FT380, FT370, FT360
2017 RibCor 70K, 68K, 66K, 64K
2016 Super Tacks, Ultra Tacks, 6092, 5092, 4092
2015 JetSpeed 300, 290, 280, 270, 260
2015 RibCor 50K, 48K, 46K, 44K
2014 Tacks, 6052, 5052, 4052, 3052
2014 RibCor, 30K, 28K, 26K
2013 RBZ, RBZ 100, RBZ 90, RBZ 80, RBZ 70
SpeedBlade 4.0 Runners
CCM SpeedBlade XSG Holder and runner (Goalie)
Details: "SpeedBlade" on the front post, "XSG" with quick-release dial on the rear post
2023 EFlex 6, 6.9, 6.5
2020 Super Tacks AS3 Pro, 9380, 9370
2019 JetSpeed FT2, FT480, FT460
SpeedBlade XSG Runners
CCM Prolite G Holder (Goalie)
Details: "CCM" on the front, "CCM" on the back
2018 Tacks AS1, 9080, 9060
2016 Super Tacks, 6092, 4092
2016 RibCor 50K, 44K, 40K
Prolite G Runners
True Skate Holder and Runner Compatibility
True Shift Max Holder
Details: "Shift Max" on the front post, "True" and blue runner release on the rear post
2023 Hzrdus 9X, 7X, 5X
2022 Catalyst 9, 7, 5
Shift Max Runners
True Shift Holder
Details: "Shift" on the front post, "True" and blue runner release on the rear post
2020 TF Pro Custom, TF9, TF7
2019 Senior Pro Custom Skate
Shift Runners
Graf Skate Holder and Runner Compatibility
Graf Ultra 5000 Holder
Details: "Ultra 5000" on the bottom, NT-Lite on the rear post
2020 Peakspeed PK4900, PK3900, PK2900
2019 Peakspeed PK7900, PK5900, PK4700, PK1900
2019 Classic G755, G709, G703
Cobra Runners
Marsblade Skate Holder and Runner Compatibility
Marsblade I2 Holder
Details: "Marsblade" on the front post with runner release system, "yellow" rocker-system sticker on the rear post
This is an aftermarket holder and does not come on any specific brand of skate.
I2 Runners I2 Holder
Ice Hockey Runner and Holder Sizing Charts
Bauer Player Runner and Holder Sizing Charts
BAUER TUUK EDGE - RUNNER AND HOLDER SIZING GUIDELINES |
|||
---|---|---|---|
Compatible with Bauer Player Skates (2013 - Present) | |||
Runner/Holder Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Runner/Holder Length |
Jr 1 | 1.0 - 1.5 | 1.0 - 1.5 | 212mm |
Jr 2 | 2.0 - 2.5 | 2.0 - 2.5 | 221mm |
Jr 3 | 3.0 - 3.5 | 3.0 - 3.5 | 230mm |
Jr 4 | 4.0 - 4.5 | 4.0 - 4.5 | 238mm |
Jr 5 | 5.0 - 5.5 | 5.0 | 246mm |
Sr 6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm |
Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm |
Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm |
Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm |
Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm |
Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm |
Sr 12 | 12.0 | 11.5 - 12.0 | 306mm |
Sr 14 | 13.0 - 15.0 | 13.0 - 15.0 | 322mm |
BAUER TUUK LIGHTSPEED 2 - RUNNER AND HOLDER SIZING GUIDELINES |
|||
---|---|---|---|
Compatible with Bauer Player Skates (2012 - 2013) | |||
Runner/Holder Size | Skate Size (D-Width) | Skate Size (EE-Width) | Runner/Holder Length |
Jr 1 | 1.0 - 1.5 | 1.0 | 212mm |
Jr 2 | 2.0 - 2.5 | 1.5 - 2.0 | 221mm |
Jr 3 | 3.0 - 3.5 | 2.5 - 3.0 | 230mm |
Jr 4 | 4.0 - 4.5 | 3.5 - 4.0 | 238mm |
Jr 5 | 5.0 - 5.5 | 4.5 - 5.0 | 246mm |
Sr 6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm |
Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm |
Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm |
Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm |
Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm |
Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm |
Sr 12 | 12.0 | 11.5 - 12.0 | 306mm |
Bauer Goalie Runner and Holder Sizing Charts
BAUER GOALIE TUUK EDGE - RUNNER AND HOLDER SIZING GUIDELINES |
|||
---|---|---|---|
Please note that Bauer changed their sizing guidelines between 2020 and 2021, ensure you correspond your skates model and year with the next two charts below. | |||
Compatible with Bauer Goalie Skates (2021 - Present) | |||
Runner/Holder Size | Skate Size (D-Width, Fit 1&2) |
Skate Size (EE-Width, Fit 3) |
Runner/Holder Length |
Jr 1 | 1.0 - 1.5 | 1.0 - 1.5 | 212mm |
Jr 2 | 2.0 - 2.5 | 2.0 - 2.5 | 221mm |
Jr 3 | 3.0- 3.5 | 3.0 - 3.5 | 230mm |
Jr 4 | 4.0 - 4.5 | 4.0 - 4.5 | 238mm |
Jr 5 | 5.0 - 5.5 | 5.0 - 5.5 | 246mm |
Sr 6 | 6.0 - 6.5 | 6.0 | 254mm |
Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm |
Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm |
Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm |
Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm |
Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm |
Sr 12 | 12.0 - 12.5 | 11.5 - 12.5 | 306mm |
BAUER GOALIE TUUK EDGE - RUNNER AND HOLDER SIZING GUIDELINES |
|||
---|---|---|---|
Compatible with Bauer Goalie Skates (2016 - 2020) | |||
Runner/Holder Size | Skate Size (D-Width) |
Skate Size (EE-Width) |
Runner/Holder Length |
Jr 1 | 1.0 - 1.5 | 1.0 - 1.5 | 212mm |
Jr 2 | 2.0 - 2.5 | 2.0 - 2.5 | 221mm |
Jr 3 | 3.0 - 3.5 | 3.0 - 3.5 | 230mm |
Jr 4 | 4.0 - 4.5 | 4.0 - 4.5 | 238mm |
Jr 5 | 5.0 - 5.5 | 5.0 | 246mm |
Sr 6 | 6.0 - 6.5 | 5.5 - 6.0 | 254mm |
Sr 7 | 7.0 - 7.5 | 6.5 - 7.0 | 263mm |
Sr 8 | 8.0 - 8.5 | 7.5 - 8.0 | 272mm |
Sr 9 | 9.0 - 9.5 | 8.5 - 9.0 | 280mm |
Sr 10 | 10.0 - 10.5 | 9.5 - 10.0 | 288mm |
Sr 11 | 11.0 - 11.5 | 10.5 - 11.0 | 296mm |
Sr 12 | 12.0 - 12.5 | 11.5 - 12.0 | 306mm |
CCM Player Runner and Holder Sizing Charts
CCM SPEEDBLADE XS - RUNNER AND HOLDER SIZING GUIDELINES |
|
---|---|
Compatible with CCM Player Skates (2019 - Present) | |
Runner/Holder Size | Skate Size (D, EE, Tapered, Regular, Wide) |
215mm | 1.0 - 1.5 |
221mm | 2.0 - 2.5 |
230mm | 3.0 - 3.5 |
238mm | 4.0 - 4.5 |
247mm | 5.0 - 5.5 |
255mm | 6.0 - 6.5 |
263mm | 7.0 - 7.5 |
271mm | 8.0 - 8.5 |
280mm | 9.0 - 9.5 |
287mm | 10.0 - 10.5 |
295mm | 11.0 - 11.5 |
304mm | 12.0 - 12.5 |
312mm | 13.0 |
CCM SPEEDBLADE 4.0 - RUNNER AND HOLDER SIZING GUIDELINES |
|
---|---|
Please note that CCM changed their sizing guidelines between 2015 and 2016, ensure you correspond your skates model and year with the next two charts below. | |
Compatible with CCM Player Skates (2016 - 2019) | |
Runner/Holder Size | Skate Size (D & EE Widths) |
215mm | 1.0 - 1.5 |
221mm | 2.0 - 2.5 |
230mm | 3.0 - 3.5 |
238mm | 4.0 - 4.5 |
247mm | 5.0 - 5.5 |
255mm | 6.0 - 6.5 |
263mm | 7.0 - 7.5 |
271mm | 8.0 - 8.5 |
280mm | 9.0 - 9.5 |
287mm | 10.0 - 10.5 |
295mm | 11.0 - 11.5 |
304mm | 12.0 - 12.5 |
312mm | 13.0 |
CCM SPEEDBLADE 4.0 - RUNNER AND HOLDER SIZING GUIDELINES | |
---|---|
Compatible with CCM Player Skates (2013 - 2015) | |
Runner/Holder Size | Skate Size (D & EE Widths) |
215mm | 1.0 |
221mm | 1.5 - 2.0 |
230mm | 2.5 - 3.0 |
238mm | 3.5 - 4.0 |
247mm | 4.5 - 5.0 |
255mm | 5.5 - 6.0 |
263mm | 6.5 - 7.0 |
271mm | 7.5 - 8.0 |
280mm | 8.5 - 9.0 |
287mm | 9.5 - 10.0 |
295mm | 10.5 - 11.0 |
304mm | 11.5 - 12.0 |
312mm | 13.0 |
CCM Goalie Runner and Holder Sizing Charts
CCM SPEEDBLADE XSG - RUNNER AND HOLDER SIZING GUIDELINES | |
---|---|
Compatible with CCM Goalie Skates (2019 - Present) | |
Runner/Holder Size | Skate Size (D & EE Widths) |
211mm | Y13.0 - 2.5 |
234mm | 3.0 - 4.5 |
250mm | 5.0 - 6.5 |
266mm | 7.0 - 8.5 |
282mm | 9.0 - 10.5 |
298mm | 11.0 - 12.0 |
CCM PROLITE G/ATTACK PROFILE - RUNNER AND HOLDER SIZING GUIDELINES |
|
---|---|
Please note that CCM changed their sizing guidelines in 2016, ensure you correspond your skates model and year with the next two charts below. | |
Compatible with CCM Tacks Goalie Skates (2016 - 2018) | |
Runner/Holder Size | Skate Size (D & EE Widths) |
Jr 1 | Y13.0 - 1.5 |
Jr 2 | 2.0 - 2.5 |
Jr 3 | 3.0 - 3.5 |
Jr 4 | 4.0 - 4.5 |
Sr 5 | 5.0 - 6.0 |
Sr 6 | 6.5 - 7.0 |
Sr 7 | 7.5 - 8.0 |
Sr 8 | 8.5 - 9.0 |
Sr 9 | 9.5 - 10.0 |
Sr 10 | 10.5 - 11.0 |
Sr 11 | 11.5 - 12.0 |
CCM PROLITE G/ATTACK PROFILE - RUNNER AND HOLDER SIZING GUIDELINES | |
---|---|
Compatible with CCM RibCor Goalie Skates (2016) | |
Runner/Holder Size | Skate Size (D & EE Widths) |
Jr 1 | 1.0 - 1.5 |
Jr 2 | 2.0 - 2.5 |
Jr 3 | 3.0 - 3.5 |
Jr 4 | 4.0 - 4.5 |
Sr 5 | 5.0 - 5.5 |
Sr 6 | 6.0 - 6.5 |
Sr 7 | 7.0 - 7.5 |
Sr 8 | 8.0 - 8.5 |
Sr 9 | 9.0 - 9.5 |
Sr 10 | 10.0 - 10.5 |
Sr 11 | 11.0 - 11.5 |
Sr 12 | 12.0 |
True Hockey Player Runner and Holder Sizing Chart
TRUE SHIFT AND SHIFT MAX - RUNNER AND HOLDER SIZING GUIDELINES | |
---|---|
Compatible with True Player Skates (2019 - Present) | |
Runner/Holder Size | Skate Size (R & W Widths) |
212mm | 1.0 - 1.5 |
221mm | 2.0 - 2.5 |
230mm | 3.0 - 3.5 |
238mm | 4.0 - 4.5 |
246mm | 5.0 - 5.5 |
254mm | 6.0 - 6.5 |
263mm | 7.0 - 7.5 |
272mm | 8.0 - 8.5 |
280mm | 9.0 - 9.5 |
288mm | 10.0 - 10.5 |
296mm | 11.0 - 11.5 |
306mm | 12.0 |
True Hockey Goalie Runner and Holder Sizing Chart
TRUE SHIFT ATTACK - RUNNER AND HOLDER SIZING GUIDELINES | ||
---|---|---|
Compatible with True Goalie Skates (2022) | ||
Runner/Holder Size | Skate Size (R & W Widths) | Runner Length |
Jr 1 | 1.0 - 1.5 | 212mm |
Jr 2 | 2.0 - 2.5 | 221mm |
Jr 3 | 3.0 - 3.5 | 230mm |
Int 4 | 4.0 - 4.5 | 238mm |
Int 5 | 5.0 - 5.5 | 246mm |
Int 6 | 6.0 - 6.5 | 254mm |
Sr 7 | 7.0 - 7.5 | 263mm |
Sr 8 | 8.0 - 8.5 | 272mm |
Sr 9 | 9.0 - 9.5 | 280mm |
Sr 10 | 10.0 - 10.5 | 288mm |
Sr 11 | 11.0 - 11.5 | 296mm |
Graf Player Runner and Holder Sizing Charts
GRAF ULTRA 5000 AND 3000 - RUNNER AND HOLDER SIZING GUIDELINES | |
---|---|
Compatible with Graf Player Skates (2019 - Present) | |
Runner/Holder Size | Skate Size (R & W Widths) |
216mm | 1.0 - 2.0 |
229mm | 2.5 - 4.0 |
242mm | 4.5 - 5.5 |
254mm | 6.0 - 6.5 |
263mm | 7.0 - 7.5 |
272mm | 8.0 - 8.5 |
280mm | 9.0 - 9.5 |
288mm | 10.0 - 10.5 |
296mm | 11.0 - 11.5 |
306mm | 12.0 |
Marsblade Player Runner and Holder Sizing Charts
MARSBLADE I2 - RUNNER AND HOLDER SIZING GUIDELINES | ||
---|---|---|
Compatible with most Player Skates | ||
Runner/Holder Size | Skate Size (D-Width, Fit 1&2) | Skate Size (EE-Width, Fit 3) |
263mm | 7.0 - 7.5 | 6.5 - 7.0 |
272mm | 8.0 - 8.5 | 7.5 - 8.0 |
280mm | 9.0 - 9.5 | 8.5 - 9.0 |
288mm | 10.0 - 10.5 | 9.5 - 10.0 |
296mm | 11.0 - 11.5 | 10.5 - 11.0 |
306mm | 12.0 - 12.5 | 11.5 - 12.0 |
More Information
Now that you have found out what size of blade or holder you need, check out all of our skate parts and accessories!